Mike Wyatt | Page 3 | routingjigs.co.uk

routingjigs.co.uk

Quality products by DT SOLUTIONS LTD | +44 1452 332727

Menu

All posts by Mike Wyatt

routingjigs.co.uk > Articles by: Mike Wyatt
JAWTC worktop connectors

60 Worktop Connectors for joining Worktops

Functions

  • Used to butt two worktops together
  • Ideal for the DIY person and the professional kitchen/shop fitter

You need

  • 3 bolts per joint for a worktop width greater than 550mm
  • 2 bolts per joint for a maximum worktop width of 550mm.
JAWTC worktop connectors

20x Worktop Connectors for joining Worktops

Functions

  • Used to butt two worktops together
  • Ideal for the DIY person and the professional kitchen/shop fitter

You need

  • 3 bolts per joint for a worktop width greater than 550mm
  • 2 bolts per joint for a maximum worktop width of 550mm.
RJBSMDF belfast sink MDF

Economy Belfast Sink Jig MDF

Functions

  • For any sink size between 300mm and 550mm deep
  • Preset depth holes for 300mm, 320mm, 340mm, 360mm, 380mm, 400mm, 420mm, 440mm, 460mm, 480mm, 500mm, 550mm
  • Depth setting with 2 pins for accurate alignment
  • Corner radius of 27mm
  • Includes four nylon locating pins, a full set of instructions with annotated diagrams
RJBSHPL belfast sink

Belfast Sink Jig HPL

Functions

  • For any sink size between 300mm and 550mm deep
  • Preset depth holes for 300mm, 320mm, 340mm, 360mm, 380mm, 400mm, 420mm, 440mm, 460mm, 480mm, 500mm, 550mm
  • Depth setting with 2 pins for accurate alignment
  • Corner radius of 27mm
  • Includes four nylon locating pins, a full set of instructions with annotated diagrams
RJDJMDF drainer jig MDF

Economy Drainer Jig MDF

Functions

  • 500mm maximum drainage groove length
  • Ramp angle can be adjusted from 1 degree to 2 degree
  •  Depth of groove can be adjusted from 7mm to 19mm
  • Engraved line for perfect lining up with the sink
  • Accurate and easy to use
  • Incorporates special Knobs to adjust the ramp angle.
RJDJHPL drainer jig

Drainer Jig HPL

Functions

  • 500mm maximum drainage groove length
  •  Ramped angle can be adjusted from 1 degree to 2 degree
  • Depth of groove can be adjusted from 7mm to 19mm
  • Engraved line for perfect lining up with the sink
  • Accurate and easy to use
  • Incorporates special Knobs to adjust the ramp angle.
RJSJHPL stair jig

Professional Stair Jig

Functions

  • OPEN and CLOSED riser stair jig
  • closed raiser stair jig (standard staircase), options for 22mm, 25.4, 28mm and 32mm tread thickness
  • The staircase produced will qualify within British Standard 585 Part 1(1989)
WJ900VHPL 900 variable wtj

900mm Variable Worktop Jig – (UK PATENT GB2413106)-Free Carry Case

Functions

  • 85 to 95 degrees Left/Right hand joints using our Angle Adjustment Plate
  • 45 & 90 degree Left/Right hand joints
  • Cuts worktops with widths of: 250/300/400/450/500/550/600/616/620/650/700/900mm
  • Peninsular joints
  • Corner radius of 100mm, end radius 500mm and 45 degree chamfer
  • Cut straight edges at 90 degrees, 45 degrees and 22.5 degrees
  • 35mm cabinet door hinge recesses (18mm carcass)
  • Hole for tap fixings 35mm (3/4″ BSP)
  • 4 slots for 65mm and 150mm joining bolts
WJ700MDF 700 economy wtj

700mm Economy Worktop Jig

Functions

  • 45 and 90 Degree Left/Right hand joints
  • Cuts worktops with widths of: 300/400/450/500/550/600/616/620/650/700mm
  • Corner radius’ of 20, 40mm, 100mm and 45 degree chamfer
  • 3 slots for 150mm joining bolts
«12345»
DT Solutions Ltd, Unit 7 Woodrow Way, Gloucester, GL2 5DX, UK
T: +44 (0) 1452 332727       F: +44 (0)1452 332828
E: contact@dtsolutionsltd.co.uk